POLYAMIDE 6.6
Polyamide 6.6
Polyamide 6.6 (PA 6.6) is - like PA 6 - a semi-crystalline polyamide with, however, some better mechanical properties. In terms of its mechanical properties, it is quite comparable to the cast PA 6.
PA 6.6 is characterized by a higher heat deflection temperature and a lower water absorption. Therefore this material has become a standard plastic for higher stressed parts in machine-, vehicle- and apparatus construction. It is well suited for mechanical processing.
Main features
better mechanical properties than PA 6
good damping properties
heat resistant up to 85°C
The types listed below are available as standard. Other special qualities and color variants are available on request, but usually only available with minimum quantities.
Type
DIN-Designation
Description
Data Sheet
FDA
Nylatron® 66
PA 6.6
unfilled standard quality
PDF
PDF
Nylatron® 66-GF30
PA 6.6-GF30
reinforced with glass fiber
PDF
-
Nylatron® 66-CA20
PA 6.6-CF20
reinforced with carbon fiber
PDF
-
Nylatron® GS
PA 6.6 MO
with MoS2
PDF
-
FDA = suitable for food contact according to FDA.
Components made of natural-colored Nylatron® 6.6 can be delivered with a statement of suitability for contact with food according to Regulation (EC) 1935/2004.
For general information on polyamides click here !
Information on PA 6 is available here !
Information on PA 4.6 click here !
Information on PA 12 is available here !